You're using an outdated browser. This website will not display correctly and some features will not work.
Learn more about the browsers we support for a faster and safer online experience.

O. Reg. 607/05: CONTROL OF EXPOSURE TO BIOLOGICAL OR CHEMICAL AGENTS

filed November 28, 2005 under Occupational Health and Safety Act, R.S.O. 1990, c. O.1

Skip to content

 

ontario regulation 607/05

made under the

occupational health and safety act

Made: November 23, 2005
Filed: November 28, 2005
Published on e-Laws: November 29, 2005
Printed in The Ontario Gazette: December 17, 2005


Amending Reg. 833 of R.R.O. 1990

(Control of Exposure to Biological or Chemical Agents)

1. Section 4 of Regulation 833 of the Revised Regulations of Ontario, 1990 is amended by striking out “but subject to section 9” in the portion before paragraph 1.

2. Section 6 of the Regulation is amended by striking out “sections 7 and 9” and substituting “section 7”.

3. (1) Subsections 9 (2), (3) and (4) of the Regulation are revoked and the following substituted:

(2) Every employer using styrene-based polyester resin in conjunction with a fibrous reinforcing agent to make or repair any goods, substance, article or thing, or part thereof, shall ensure that the exposure of workers to airborne styrene does not exceed the time-weighted average exposure value and short-term exposure value set out in Part 4 of the Schedule.

(3) An employer described in subsection (2) may provide respiratory equipment to a worker to ensure the worker’s exposure to airborne styrene does not exceed the time-weighted average exposure value and short-term exposure value set out in Part 4 of the Schedule if,

(a) the time-weighted average exposure of the worker to airborne styrene is greater than 50 but less than or equal to 100 parts styrene per million parts of air by volume; or

(b) the short-term exposure of the worker to airborne styrene, measured over 15 minutes, is greater than 100 but less than or equal to 200 parts styrene per million parts of air by volume.

(4) Every worker who is provided with respiratory equipment by an employer under subsection (3) shall use the respiratory equipment.

(2) Section 9 of the Regulation is revoked.

4. Part 3 of the Schedule to the Regulation is amended by adding the following after the paragraph that begins “The notation “skin””:

The notation “thoracic” following the name of an agent in this Schedule means that size fraction of the airborne particulate deposited anywhere in the lung airways and the gas-exchange region of the respiratory tract and collected during air sampling with a particle size-selective device that,

(a) meets the American Conference of Governmental Industrial Hygienists (ACGIH) particle size-selective criteria; and

(b) has the cut point of 10 microns at 50 per cent collective efficiency.

5. (1) Part 4 of the Schedule to the Regulation is amended by striking out, 

 

Acrylamide

 

 

 

 

 

 

(79-06-1) — Skin

 

0.03

 

 

 

 

. . . . .

 

Benzenethiol

 

 

 

 

 

 

(108-98-5)

0.5

2.2

 

 

 

 

. . . . .

 

Borates, tetra, sodium salts

 

 

 

 

 

 

(1303-96-4)

 

 

 

 

 

 

- Anhydrous

 

1

 

 

 

 

- Decahydrate

 

5

 

 

 

 

- Pentahydrate

 

1

 

 

 

 

. . . . .

 

(Butoxymethyl) oxirane

 

 

 

 

 

 

(2426-08-6)

25

133

 

 

 

 

. . . . .

 

1,2-Epoxypropane

 

 

 

 

 

 

(75-56-9)

20

47

 

 

 

 

. . . . .

 

Fensulfothion

 

 

 

 

 

 

(115-90-2)

 

0.1

 

 

 

 

. .  . . .

 

Hydrogen fluoride (as fluoride)

 

 

 

 

 

 

(7664-39-3)

 

 

 

 

3

2.5

. . . . .

 

Phorate

 

 

 

 

 

 

(298-02-2) — Skin

 

0.05

 

0.2

 

 

. . . . .

 

Rosin core solder pyrolysis products (as formaldehyde)

 

0.1

 

 

 

 

. .  . . .

 

Sulfuric acid

 

 

 

 

 

 

(7664-93-9)

 

1

 

3

 

 

. . . . .

 

Synthetic Vitreous Fibres (Man made Mineral Fibres)

 

 

 

 

 

 

- Continuous filament glass fibres

1f/cc

 

 

 

 

 

- Continuous filament glass fibres, inhalable

 

5

 

 

 

 

- Glass wool fibres

1f/cc

 

 

 

 

 

- Rock wool fibres

1f/cc

 

 

 

 

 

- Slag wool fibres

1f/cc

 

 

 

 

 

- Special purpose glass fibres

1f/cc

 

 

 

 

 

- Synthetic vitreous fibres, not otherwise classified (excluding fibrous glass dust and mineral wool fibre)

1f/cc(E)

 

 

 

 

 

. . . . .

 

Temephos

 

 

 

 

 

 

(3383-96-8)

 

10

 

 

 

 

. . . . .

 

Tetraethyl dithiono-pyrophosphate (TEPP)

 

 

 

 

 

 

(3689-24-5) — Skin

 

0.2

 

 

 

 

(2) Part 4 of the Schedule to the Regulation is amended by adding the following:

 

Acrylamide, inhalable, vapour and aerosol

 

 

 

 

 

 

(79-06-1) — Skin

 

0.03

 

 

 

 

. . . . .

 

Borate compounds, Inorganic, inhalable

 

 

 

 

 

 

 

 

 

 

 

 

 

- Anhydrous  (1330-43-4)

 

2

 

6

 

 

- Decahydrate  (1303-96-4)

 

2

 

6

 

 

- Orthoboric acid (10043-35-3)

 

2

 

6

 

 

- Pentahydrate  (12179-04-3)

 

2

 

6

 

 

. . . . .

 

1-Bromopropane

 

 

 

 

 

 

(106-94-5)

10

 

 

 

 

 

. . . . .

 

n-Butyl glycidyl ether (BGE), also known as (Butoxymethyl) oxirane

 

 

 

 

 

 

(2426-08-6) — Skin

3

 

 

 

 

 

. . . . .

 

Dichloroacetic acid

 

 

 

 

 

 

(79-43-6) — Skin

0.5

 

 

 

 

 

. . . . .

 

Ethylene

 

 

 

 

 

 

(74-85-1)

200

 

 

 

 

 

. . . . .

 

Fensulfothion, inhalable, vapour and aerosol

 

 

 

 

 

 

(115-90-2) — Skin

 

0.01

 

 

 

 

. . . . .

 

Gallium arsenide, respirable

 

 

 

 

 

 

(1303-00-0)

 

0.0003

 

 

 

 

. . . . .

 

Hydrogen fluoride (as F)

 

 

 

 

 

 

(7664-39-3)

0.5

 

 

 

2

 

. . . . .

 

Methane

 

 

 

 

 

 

(74-82-8)

1000

 

 

 

 

 

. . . . .

 

Natural gas

 

 

 

 

 

 

(8006-14-2)

1000

 

 

 

 

 

. . . . .

 

Phenyl mercaptan, also known as Benzenethiol

 

 

 

 

 

 

(108-98-5) — Skin

0.1

 

 

 

 

 

. . . . .

 

Phorate, inhalable, vapour and aerosol

 

 

 

 

 

 

(298-02-2) — Skin

 

0.05

 

 

 

 

. . . . .

 

Propylene oxide, also known as 1,2-Epoxypropane

 

 

 

 

 

 

(75-56-9)

2

 

 

 

 

 

. . . . .

 

Sulfotepp, inhalable, vapour and aerosol, also known as Tetraethyl dithiono-pyrophosphate(TEDP)

 

 

 

 

 

 

(3689-24-5) — Skin

 

0.1

 

 

 

 

. . . . .

 

Sulfuric acid, thoracic

 

 

 

 

 

 

(7664-93-9)

 

0.2

 

 

 

 

. . . . .

 

Synthetic Vitreous Fibres (Man made Mineral Fibres)

 

 

 

 

 

 

- Continuous filament glass fibres, inhalable

 

5

 

 

 

 

- Continuous filament glass fibres

1f/cc(H)

 

 

 

 

 

- Glass wool fibres

1f/cc(H)

 

 

 

 

 

- Refractory ceramic fibres

0.5f/cc(H)

 

 

 

 

 

- Rock wool fibres

1f/cc(H)

 

 

 

 

 

- Slag wool fibres

1f/cc(H)

 

 

 

 

 

- Special purpose glass fibres

1f/cc(H)

 

 

 

 

 

- Synthetic vitreous fibres, not otherwise classified (excluding fibrous glass dust and mineral wool fibre)

1f/cc(E)(H)

 

 

 

 

 

. . . . .

 

Temephos, inhalable, vapour and aerosol

 

 

 

 

 

 

(3383-96-8) — Skin

 

1

 

 

 

 

. . . . .

 

Tetrakis (hydroxymethyl) phosphonium salts

 

 

 

 

 

 

- Tetrakis (hydroxymethyl) phosphonium chloride (124-64-1)

 

2

 

 

 

 

- Tetrakis (hydroxymethyl) phosphonium sulphate (55566-30-8)

 

2

 

 

 

 

(3) Part 4 of the Schedule to the Regulation is amended by striking out, 

 

Styrene*

 

 

 

 

 

 

(100-42-5)

50

213

200

852

 

 

and substituting the following:

 

Styrene*

 

 

 

 

 

 

(100-42-5)

50

 

100

 

 

 

(4) Part 4 of the Schedule to the Regulation is amended by striking out, 

Formaldehyde

 

 

 

 

 

 

(50-00-0)

1

1.5

2

3

 

 

. . . . .

 

Styrene*

 

 

 

 

 

 

(100-42-5)

50

 

100

 

 

 

and substituting the following: 

 

Formaldehyde

 

 

 

 

 

 

(50-00-0)

 

 

1.0

 

1.5

 

. . . . .

 

Styrene

 

 

 

 

 

 

(100-42-5)

35

 

100

 

 

 

(5) Part 4 of the Schedule to the Regulation is amended by striking out “*Special exceptions may apply to this substance; see section 9 of the Regulation” at the end of the Table.

(6) Part 4 of the Schedule to the Regulation is amended by adding the following footnote:

(H) Respirable fibres: length greater than 5 microns; aspect ratio greater than or equal to 3:1 as determined by the membrane filter method at 400-450 times magnification (4 mm objective), using phase-contrast illumination.

6. Part 9 of the Schedule to the Regulation is amended by striking out,

 

Ethylene

(74-85-1)

. . . . .

 

Methane

(74-82-8)

7. Part 10 of the Schedule to the Regulation is amended by adding the following:

 

Rosin core solder pyrolysis products (as formaldehyde)

 

8. (1) Subject to subsections (2) and (3), this Regulation comes into force on the day it is filed.

(2) Subsections 3 (1) and 5 (3) come into force on March 1, 2006.

(3) Sections 1 and 2 and subsections 3 (2) and 5 (4) and (5) come into force on December 31, 2007.